Mechanical Engineering technical Interview Questions answers

In this post, we will Discuss Mechanical Engineering technical Interview Questions answers. These Questions Answers will help you a lot in your interviews.Mechanical Engineering Technical Interview questions answers

Mechanical Engineering Technical Interview questions answers

This post is shared by Mr. R.P. Singh has 20 years of working experience.

You can also share your knowledge here

Mechanical Engineering technical Interview Questions answers

Question No.1  Define fatigue.

Answer: When a material is subjected to repeated stress, it fails at stresses below the yield point stress; such type of failure of the material is called fatigue.

Question No.2 Define Factor of safety.

Answer: The ratio between maximum stresses to working stress is known as the factor of safety.

The factor of safety = Maximum stress /Working stress.

Question No.3 What is the impact load?

Answer: If the time of load application is less than one-third of the lowest natural period of vibration of the part, it is called an impact load.

Question No.4 What are the various phases of the design process?

Answer: The various phases of the design process are:

  1. Recognition of need.
  2. Definition of problem
  3. Synthesis
  4. Analysis and optimization
  5. Evaluation
  6. Presentation
Question No.5  Differentiate between repeated stress and reversed stress.

Answer: Repeated stress refers to a stress varying from zero to a maximum value of same nature. The reversed stress of cyclic stress varies from one value of tension to the same value of compression.

Question No.6 Define stress concentration and stress concentration factor.

Answer: Stress concentration is the increase in local stresses at points of rapid change in cross-section or discontinuities.

Stress concentration factor is the ratio of maximum stress at the critical section to the nominal stress.

Question No.7 What are the factors to be considered in the selection of materials for a machine element?
Answer: While selecting a material for a machine element, the following factors are to be considered
  1. Material availability
  2. Manufacturing ease
  3. Required material properties
  4. Cost
Question No.8 Give some methods of reducing stress concentration.
Answer: Some of the methods are:
  1. Use of multiple holes instead of the single hole.
  2. Undercutting the shoulder parts.
  3. Providing fillets.
  4. Avoiding sharp.
Question No.9 Explain notch sensitivity. What are the factors that affect notch sensitivity?

Answer: Notch sensitivity (q) is the degree to which the theoretical effect of stress concentration is actually reached.

The factors affecting notch sensitivity are:

  1. Notch radius
  2. Size of component
  3. Type of loading
  4. Material
  5. Grain Structure
Question No.10 What are the different types of loads that can act on machine components?
Answerdifferent loads on machine components are:
  1. Impact load.
  2. Variable load.
  3. Shock load
  4. Steady load

This post is shared by Mr. R.P. Singh has 20 years of working experience.

Print Friendly, PDF & Email

 

You can also share your knowledge here

Follow us on:

Spread the knowledge
  • 3
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
    3
    Shares

Leave a Reply

Your email address will not be published. Required fields are marked *